 |
|
|
 首页 |
名片设计 CorelDRAW Illustrator AuotoCAD Painter 其他软件 Photoshop Fireworks Flash |
|
以下为我的jserv.conf 以及 jserv.properties,zone.properties # cat jserv.conf ###################################################################### ######### # Apache JServ Configuration File # ###################################################################### ######### # Note: this file should be appended or included into your httpd.conf # Tell Apache on win32 to load the Apache JServ communication module #LoadModule jserv_module modules/ApacheModuleJServ.dll # Tell Apache on Unix to load the Apache JServ communication module # For shared object builds only!!! #LoadModule jserv_module /usr/local/apache/jserv/libexec/mod_jserv.so # Whether Apache must start Apache JServ or not (On=Manual Off=Autosta rt) # Syntax: ApJServManual [on/off] # Default: "Off" ApJServManual off # Properties filename for Apache JServ in Automatic Mode. # In manual mode this directive is ignored # Syntax: ApJServProperties [filename] # Default: "./conf/jserv.properties" ApJServProperties /usr/local/apache/jserv/etc/jserv.properties # Log file for this module operation relative to Apache root directory . # Set the name of the trace/log file. To avoid possible confusion abo ut # the location of this file, an absolute pathname is recommended. # # This log file is different than the log file that is in the # jserv.properties file. This is the log file for the C portion of Apa che # JServ. # # On Unix, this file must have write permissions by the owner of the J VM # process. In other words, if you are running Apache JServ in manual m ode # and Apache is running as user nobody, then the file must have its # permissions set so that that user can write to it. # Syntax: ApJServLogFile [filename] # Default: "./logs/mod_jserv.log" # Note: when set to "DISABLED", the log will be redirected to Apache e rror log ApJServLogFile /usr/local/apache/logs/mod_jserv.log # Log Level for this module # Syntax: ApJServLogLevel [debug|info|notice|warn|error|crit|alert|eme rg] # Default: info (unless compiled w/ JSERV_DEBUG, in which case it\\'s debug) ApJServLogLevel notice # Protocol used by this host to connect to Apache JServ # (see documentation for more details on available protocols) # Syntax: ApJServDefaultProtocol [name] # Default: "ajpv12" ApJServDefaultProtocol ajpv12 # Default host on which Apache JServ is running # Syntax: ApJServDefaultHost [hostname] # Default: "localhost" #ApJServDefaultHost java.apache.org #ApJServDefaultHost www.snc.siemens.com.cn # Default port that Apache JServ is listening to # Syntax: ApJServDefaultPort [number] # Default: protocol-dependant (for ajpv12 protocol this is "8007") ApJServDefaultPort 8007 # The amount of time to give to the JVM to start up as well # as the amount of time to wait to ping the JVM to see if it # is alive. Slow or heavily loaded machines might want to # increase this value. # Default: 10 seconds # ApJServVMTimeout 10 # Passes parameter and value to specified protocol. # Syntax: ApJServProtocolParameter [name] [parameter] [value] # Default: NONE # Note: Currently no protocols handle this. Introduced for future prot ocols. # Apache JServ secret key file relative to Apache root directory. # Syntax: ApJServSecretKey [filename] # Default: "./conf/jserv.secret.key" # Warning: if authentication is DISABLED, everyone on this machine (no t just # this module) may connect to your servlet engine and execute servlet # bypassing web server restrictions. See the documentation for more in formation #ApJServSecretKey /usr/local/apache/jserv/etc/jserv.secret.key ApJServSecretKey DISABLED # Mount point for Servlet zones # (see documentation for more information on servlet zones) # Syntax: ApJServMount [name] [jserv-url] # Default: NONE # Note: [name] is the name of the Apache URI path to mount jserv-url o n # [jserv-url] is something like "protocol://host:port/zone" # If protocol, host or port are not specified, the values from # "ApJServDefaultProtocol", "ApJServDefaultHost" or "ApJServDefaultPo rt" # will be used. # If zone is not specified, the zone name will be the first subdirect ory of # the called servlet. # Example: "ApJServMount /servlets /myServlets" # if user requests "http://host/servlets/TestServlet" # the servlet "TestServlet" in zone "myServlets" on default host # thru default protocol on defaul port will be requested # Example: "ApJServMount /servlets ajpv12://localhost:8007" # if user requests "http://host/servlets/myServlets/TestServlet" # the servlet "TestServlet" in zone "myServlets" will be requested # Example: "ApJServMount /servlets ajpv12://jserv.mydomain.com:15643/m yServlets" # if user requests "http://host/servlets/TestServlet" the servlet # "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" usi ng # "ajpv12" protocol on port "15643" will be executed ApJServMount /servlets /root ApJServMount /servlet /root # Whether inherits base host mount points or not # Syntax: ApJServMountCopy [on/off] # Default: "On" # Note: This directive is meaninful only when virtual hosts are being used ApJServMountCopy on # Executes a servlet passing filename with proper extension in PATH_TR ANSLATED # property of servlet request. # Syntax: ApJServAction [extension] [servlet-uri] # Defaults: NONE # Notes: This is used for external tools. #ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet #ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet #ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI #ApJServAction .xml /servlets/org.apache.cocoon.Cocoon #ApJServAction .jsp /alph/gnujsp ApJServAction .jsp /servlets/oracle.jsp.JspServlet ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI # Enable the Apache JServ status handler with the URL of # "http://servername/jserv/" (note the trailing slash!) # Change the "deny" directive to restrict access to this status page. SetHandler jserv-status order deny,allow deny from all allow from 127.0.0.1 ############################## W A R N I N G ######################### ######### # Remember to disable or otherwise protect the execution of the Apache JServ # # Status Handler (see right above) on a production environment since t his may # # give untrusted users the ability to obtain restricted information on your # # servlets and their initialization arguments such as JDBC passwords a nd # # other important information. The Apache JServ Status Handler should be # # accessible only by system administrators. # ###################################################################### ######### 返回类别: 教程 上一教程: ArrayAccess接口介绍 下一教程: session全教程(三) 您可以阅读与"Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转二)"相关的教程: · Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转四) · Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转一) · Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转三) · 这是我在Linux 6.2下APACHE+PHP4+MYSQL的安装脚本。大家看看吧！写得很简陋，不过简化了我的不少工作。 · 新版mysql+apache+php Linux安装指南 |
  |
| 快精灵印艺坊 版权所有 |
首页 会员中心在线印刷在线编辑付款方式索取样品设计指南连锁门店
|
||
