 |
|
|
 首页 |
名片设计 CorelDRAW Illustrator AuotoCAD Painter 其他软件 Photoshop Fireworks Flash |
|
# cat jserv.properties ###################################################################### ######### # Apache JServ Configuration File # ###################################################################### ######### ################################ W A R N I N G ####################### ######### # Unlike normal Java properties, JServ configurations have some import ant # extentions: # # 1) commas are used as token separators # 2) multiple definitions of the same key are concatenated in a # comma-separated list. ###################################################################### ######### # # Execution parameters ####################### # The Java Virtual Machine interpreter. # Syntax: wrapper.bin=[filename] (String) # Note: specify a full path if the interpreter is not visible in your path. wrapper.bin=/usr/local/jdk/bin/java # Arguments passed to Java interpreter (optional) # Syntax: wrapper.bin.parameters=[parameters] (String) # Default: NONE # Apache JServ entry point class (should not be changed) # Syntax: wrapper.class=[classname] (String) # Default: "org.apache.jserv.JServ" # Arguments passed to main class after the properties filename (not us ed) # Syntax: wrapper.class.parameters=[parameters] (String) # Default: NONE # Note: currently not used # PATH environment value passed to the JVM # Syntax: wrapper.path=[path] (String) # Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems # "c:/(windows-dir);c:/(windows-system-dir)" for Win32 system s # Notes: if more than one line is supplied these will be concatenated using # ":" or ";" (depending wether Unix or Win32) characters # Under Win32 (windows-dir) and (windows-system-dir) will be # automatically evaluated to match your system requirements wrapper.path=/usr/bin:/usr/local/bin:/usr/local/jdk/bin:/usr/local/jsd k/bin:/usr/local/jswdk/bin:/usr/local/jre/bin # CLASSPATH environment value passed to the JVM # Syntax: wrapper.classpath=[path] (String) # Default: NONE (Sun\\'s JDK/JRE already have a default classpath) # Note: if more than one line is supplied these will be concatenated u sing # ":" or ";" (depending wether Unix or Win32) characters. JVM mu st be # able to find JSDK and JServ classes and any utility classes us ed by # your servlets. # Note: the classes you want to be automatically reloaded upon modific ation # MUST NOT be in this classpath or the classpath of the shell # you start the Apache from. # wrapper.classpath=/usr/local/apache/jserv/libexec/ApacheJServ.jar wrapper.classpath=/usr/local/jsdk/lib/jsdk.jar wrapper.classpath=/usr/local/jre/lib/rt.jar wrapper.classpath=/usr/local/jdk/lib/tools.jar wrapper.classpath=/usr/local/ojsp/lib/ojsp.jar wrapper.classpath=/usr/local/jswdk/lib/servlet.jar wrapper.classpath=/usr/local/ojsp/lib/xmlparsev2.jar wrapper.classpath=/usr/local/ojsp/lib/translator.zip # An environment name with value passed to the JVM # Syntax: wrapper.env=[name]=[value] (String) # Default: NONE on Unix Systems # SystemDrive and SystemRoot with appropriate values on Win32 systems # An environment name with value copied from caller to Java Virtual Ma chine # Syntax: wrapper.env.copy=[name] (String) # Default: NONE # Copies all environment from caller to Java Virtual Machine # Syntax: wrapper.env.copyall=[true|false] (boolean) # Default: false # Protocol used for signal handling # Syntax: wrapper.protocol=[name] (String) # Default: ajpv12 # # General parameters ###################### # Set the default IP address or hostname Apache JServ binds (or listen s) to. # # If you have a machine with multiple IP addresses, this address # will be the one used. If you set the value to localhost, it # will be resolved to the IP address configured for the locahost # on your system (generally this is 127.0.0.1). This feature is so # that one can have multiple instances of Apache JServ listening on # the same port number, but different IP addresses on the same machine . # Use bindaddress=* only if you know exactly what you are doing here, # as it could let JServ wide open to the internet. # You must understand that JServ has to answer only to Apache, and sho uld not # be reachable by nobody but mod_jserv. So localhost is usually a # good option. The second best choice would be an internal network add ress # (protected by a firewall) if JServ is running on another machine tha n Apache. # Ask your network admin. # "*" _may_ be used on boxes where some of the clients get connected u sing # "localhost"and others using another IP addr. # # Syntax: bindaddress=[ipaddress] or [localhost] or [*] # Default: localhost # bindaddress=i140.231.59.250 # Set the port Apache JServ listens to. # Syntax: port=[1024,65535] (int) # Default: 8007 port=8007 # # Servlet Zones parameters ########################### # List of servlet zones Apache JServ manages # Syntax: zones=[servlet zone],[servlet zone]... (Comma separated list of String) # Default: NONE zones=root # Configuration file for each servlet zone (one per servlet zone) # Syntax: [servlet zone name as on the zones list].properties=[full pa th to configFile] (String) # Default: NONE # Note: if the file could not be opened, try using absolute paths. root.properties=/usr/local/apache/jserv/etc/zone.properties # # Thread Pool parameters ######################### # Enables or disables the use of the thread pool. # Syntax: pool=[true|false] (boolean) # Default: false # WARNING: the pool has not been extensively tested and may generate d eadlocks. # For this reason, we advise against using this code in production env ironments. pool=false # Indicates the number of idle threads that the pool may contain. # Syntax: pool.capacity=(int)>0 # Default: 10 # NOTE: depending on your system load, this number should be low for c ontantly # loaded servers and should be increased depending on load bursts. pool.capacity=10 # Indicates the pool controller that should be used to control the # level of the recycled threads. # Syntax: pool.controller=[full class of controller] (String) # Default: org.apache.java.recycle.DefaultController # NOTE: it is safe to leave this unchanged unless special recycle beha vior # is needed. Look at the "org.apache.java.recycle" package javadocs fo r more # info on other pool controllers and their behavior. pool.controller=org.apache.java.recycle.DefaultController # # Security parameters ##################### # Enable/disable the execution of org.apache.jserv.JServ as a servlet. # Syntax: security.selfservlet=[true|false] (boolean) # Default: false security.selfservlet=true # Set the maximum number of socket connections Apache JServ may handle # simultaneously. Make sure your operating environment has enough file # descriptors to allow this number. # Syntax: security.maxConnections=(int)>1 # Default: 50 security.maxConnections=50 # Backlog setting for very fine performance tunning of JServ. # Unless you are familiar to sockets leave this value commented out. # security.backlog=5 # List of IP addresses allowed to connect to Apache JServ. This is a f irst # security filtering to reject possibly unsecure connections and avoid the # overhead of connection authentication. # # (please don\\'t use the following one unless you know what you are doi ng : # security.allowedAddresses=DISABLED # allows connections on JServ\\'port from entire internet.) # You do need only to allow YOUR Apache to talk to JServ. # # # Default: 127.0.0.1 # Syntax: security.allowedAddresses=[IP address],[IP Address]... (Comm a separated list of IP addresses) #security.allowedAddresses=127.0.0.1 # Enable/disable connection authentication. # NOTE: unauthenticated connections are a little faster since authenti cation # handshake is not performed at connection creation. # Syntax: security.authentication=[true,false] (boolean) # Default: true security.authentication=false # Authentication secret key. # The secret key is passed as a file that must be kept secure and must # be exactly the same of those used by clients to authenticate themsel ves. # Syntax: security.secretKey=[secret key path and filename] (String) # Default: NONE # Note: if the file could not be opened, try using absolute paths. #security.secretKey=/usr/local/apache/jserv/etc/jserv.secret.key # Length of the randomly generated challenge string (in bytes) used to # authenticate connections. 5 is the lowest possible choice to force a safe # level of security and reduce connection creation overhead. # Syntax: security.challengeSize=(int)>5 # Default: 5 #security.challengeSize=5 # # Logging parameters #################### # Enable/disable Apache JServ logging. # Syntax: log=[true,false] (boolean) # Default: true log=true # Set the name of the trace/log file. To avoid possible confusion abo ut # the location of this file, an absolute pathname is recommended. # # On Unix, this file must have write permissions by the owner of the J VM # process. In other words, if you are running Apache JServ in manual m ode # and Apache is running as user nobody, then the file must have its # permissions set so that that user can write to it. # Syntax: log.file=[log path and filename] (String) # Default: NONE # Note: if the file could not be opened, try using absolute paths. log.file=/usr/local/apache/log/jserv.log # Enable the timestamp before the log message # Syntax: log.timestamp=[true,false] (boolean) # Default: true log.timestamp=true # Use the given string as a data format # (see java.text.SimpleDateFormat for the list of options) # Syntax: log.dateFormat=(String) # Default: [dd/MM/yyyy HH:mm:ss:SSS zz] log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz] # WARNING: Default values are lousy, you probably want to tweak them a nd # report the results back to the development team. # Syntax: log.queue.maxage = [milliseconds] # Default: 5000 log.queue.maxage = 5000 # Syntax: log.queue.maxsize = [integer] # Default: 1000 log.queue.maxsize = 1000 # Enable the timestamp before the log message # Syntax: log.timestamp=[true,false] (boolean) # Default: true log.timestamp=true # Use the given string as a data format # (see java.text.SimpleDateFormat for the list of options) # Syntax: log.dateFormat=(String) # Default: [dd/MM/yyyy HH:mm:ss:SSS zz] log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz] # Syntax: log.queue.maxage = [milliseconds] # Default: 5000 log.queue.maxage = 5000 # Syntax: log.queue.maxsize = [integer] # Default: 1000 log.queue.maxsize = 1000 # Enable/disable logging the channel name # Default: false # log.channel=false # Enable/disable channels, each logging different actions. # Syntax: log.channel.[channel name]=[true,false] (boolean) # Default: false # Info channel - quite a lot of informational messages # hopefully you don\\'t need them under normal circumstances # log.channel.info=true # Servlets exception, i.e. exception caught during # servlet.service() processing are monitored here # you probably want to have this one switched on log.channel.servletException=true # JServ exception, caught internally in jserv # we suggest to leave it on log.channel.jservException=true # Warning channel, it catches all the important # messages that don\\'t cause JServ to stop, leave it on log.channel.warning=true # Servlet log # All messages logged by servlets. Probably you want # this one to be switched on. log.channel.servletLog=true # Critical errors # Messages produced by critical events causing jserv to stop log.channel.critical=true # Debug channel # Only for internal debugging purposes # log.channel.debug=true 返回类别: 教程 上一教程: 用PHP动态创建Flash动画 下一教程: 一个产生随机密码的函数 您可以阅读与"Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转三)"相关的教程: · Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转一) · Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转二) · Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL) 的安装(转四) · 这是我在Linux 6.2下APACHE+PHP4+MYSQL的安装脚本。大家看看吧！写得很简陋，不过简化了我的不少工作。 · Apache, PHP在Windows 9x/NT下的安装与配置 (一) |
  |
| 快精灵印艺坊 版权所有 |
首页 会员中心在线印刷在线编辑付款方式索取样品设计指南连锁门店
|
||
